There was a time when we used to use CD or DVD to install Windows in our system. But the times are changing now we CD or DVD in place of Pen Drive make use of. Now this question must be coming in your mind that to do this how to make pen drive bootable,
Many people find this work very difficult, so they go to a computer shop or any computer technicians. He charges them around Rs.200 to Rs.300 for installing System Format Windows. Whereas if I say that now you will not have to pay any money and you can easily do this work yourself.
Yes friends, I am not lying. It is very easy to make USB Pendrive bootable. So today I thought why not you guys How to make Pendrive bootable Complete information should be provided about the subject so that you also do not have any problem in it and you will not have to depend on anyone to do this. So without further delay let’s start how to make bootable pen drive receive complete information.
What is Booting?
when we own computer When we start, then there are some operations that our computer starts performing on its own. These operations are called booting.
In the process of booting, the system checks all the hardwares and softwares whether they are correctly installed or not or properly attached or not. Also, they load all the files needed in the system.
This Booting In the process, all the files that are stored in the ROM chip are loaded for the proper running of the system. In addition, the system reads all the information from those files which are installed in the ROM chip.
After booting, the system automatically displays all the information. If you want to know the process of booting in details then you have to read the below paragraphs properly, where I have tried to explain the whole process.
Types of Booting
By the way, there are mainly two types of booting, which are
1) Warm Booting
Performing Warm Booting means restarting your computer. It is also called soft boot.
A warm boot is typically initiated by the operating system itself, not by turning on the power button in the computer. For example, to perform a warm boot in Windows system, you have to choose the option of Restart from the Start Menu.
Warm booting (which actually means restarting the computer) is much more common than cold booting because most users prefer to keep their computers in sleep mode when they are not using it. By the way, power on self test (POST) is not used in a warm boot like it is done in cold boot, but in this all the rest of the boot sequence is done.
2) Cold Booting
To perform Cold Booting means to start the computer using Power Button. It is also called “hard boot”, which means to start the computer when it is in the turned off state.
This is often used in contrast to Warm Boot, which means simply restarting the computer, which is already turned on. Power Button is definitely used to do a cold boot.
Both cold boot and warm boot system clear the RAM and perform the boot sequence from scratch. But unlike a cold boot, in a warm boot all system caches may or may not be cleared, these caches store temporary information.
Additionally, “power on self test” (POST) is performed in cold boot, in which a series of system checks are performed from the beginning of the boot sequence.
Although both warm boot and cold boot are similar, but in cold boot the system is completely reset as compared to warm boot. Therefore, more preference is given to cold boot or complete turn off during computer troubleshooting.
How does booting work?
Before understanding booting, let’s understand some things.
your operating system (Windows,Linux,Mac), always on your hard drive / SSD It is stored in itself, along with other configurations. These operating systems do not operate from the hard drive itself, because secondary storage devices are more slow.
Therefore, in booting the OS is loaded (precisely this kernel is a component of the OS) in the main memory.
When you power on the system, the first thing that fires up is BIOS (in which you Manufacturer’s logo will be visible). It is the BIOS (Basic Input Output System) that loads a small program from a special location on your hard drive (which people MBR / boot partition say), and it bootloader is called.
It is the bootloader, which is responsible for loading the kernel, and the primary processes, which then slowly load all the small and big processes, and you reach the login screen, in which many processes background were running in.
Pendrive Ko Bootable Kaise Banaye
Everyone knows that the trend of CD / DVD is not there anymore, just like that, it has gone from the market. Most users try to install Windows from their pendrive. But for this Pendrive has to be bootable first, in the system to install Windows.
As simple as it sounds, it is equally simple to do in the same way. You can easily install Windows on your laptop or desktop with the help of a bootable usb pendrive. But often people do not know how to make Pendrive bootable?
To solve this problem of you people, I am going to tell you two easy methods by which you can create bootable pendrive very easily. Those two methods are :-
1. Bootable Pen Drive Software Rufus by use of
2. Create Bootable USB from ISO with the help of run command
Before creating any Bootable USB pendrive, we need the ISO file of Windows, which you want to install in your system. So keep the ISO file with you first.
Step 1, First download Rufus.exe [File Size: 1 MB] file from link.
Step 2. Insert your pendrive and download Rufus File together.
Step 3, Click on the DVD icon and select the Windows.iso file.
Step 4, Then click on Start and wait till this process is completed. It takes a few minutes for this process to finish, to copy all the iso files to the pendrive.
Once the whole process is completed correctly then your pendrive is ready to install windows.
Create Bootable Pen Drive with Run Command
You may find this command method difficult to break, if we compare it with Rufus method then. But there is nothing to panic because I am going to tell you the steps of the whole process. I want to tell you that this tutorialhow to make pendrive bootable “Tested in Windows 10 and it has also been found successful.
Step 1, Insert the USB flash drive into your computer.
Step 2, Plug your USB flash drive into any rectangular USB ports on the computer. Flash drives only fit in one way, so don’t use too much force while entering the USB drive, if it doesn’t fit.
- Remember that this USB flash drive should be at least 8 gigabytes or more of space so that you can accommodate all types of operating system installation files in it.
Step 3, Open Start
Click on the Windows logo which is located in the bottom-left corner of the screen.
Step 4. type in command prompt,
By doing this, it will search the Command Prompt program located in your computer.
Step 5. Right-click Command Prompt
This is a black box at the top of the Start window. This will prompt you to come up with a drop-down menu.
- If your mouse does not have a right-click button, then click on the right side of the mouse, or use both fingers to click the mouse.
- If your computer uses a trackpad instead of a mouse, then use both fingers to tap on the trackpad and press the bottom-right side of the trackpad.
Step 6. Click Run as administrator.
It is located in the drop-down menu.
You have to click Yes when it prompts.
With this your decision will be confirmed and Command Prompt will open.
Step 7. Enter “
Then type diskpart and then press Enter. Will prompt you to confirm To confirm the decision.
Stap 8. Open the list of all connected drives.
For this, type list disk Command Prompt, then press Enter.
Find your USB flash drive
Find the name, letter, and size of your flash drive to identify it.
- If you don’t know which one is your flash drive, then unplug that flash drive again.
disk listRun the command, by doing this you will get to know about that disk.
- This flash drive is often the bottom disk of the menu.
Step 9. Select your flash drive,
Type select disk number in the Command Prompt and make sure to replace that “number” with the number of the flash drive as presented in the list and then press Enter.
Erase all the contents of the flash drive.
clean And then press Enter.
Create a new partition in Flash Drive.
To do this:
create partition primaryand press Enter
select partition 1and press Enter
activeand press Enter
Step 10. Format flash drive
format fs=fat32 quick In Command Prompt, then press Enter.
If you get any error in USB creation, then repeat this process by writing this
format fs=ntfs quick in its place in the command prompt.
Step 11. Assign a letter to the USB drive.
assign and press Enter. You will see a confirmation message in the Command Prompt window.
Step 12. Close the Command Prompt window(s).
Now your USB drive is bootable, it means you can now install ISO file of one operating system or hard drive image of one computer in USB drive in another computer.
If you want, you can install windows in a bootable USB pen drive. If you want, you can change the boot priority from the BIOS setting and select the primary boot device USB pen drive or flash drive.
Does the computer shut down in WARM BOOTING?
No, the computer does not shut down completely inside the WARM BOOTING PROCESS.
How many types of booting are there?
There are two types of booting in the computer; Cold booting and Warm booting.
what did you learn today
I hope you like my article Pendrive Ko Bootable Kaise Banaye Must have liked it. It has always been my endeavor to provide complete information about how to make USB Pendrive bootable to the readers, so that they do not have to search any other sites or internet in the context of that article.
This will also save their time and they will also get all the information in one place. If you have any doubts about this article or you want that there should be some improvement in it, then you can write low comments for this.
If you liked this post How to Make Bootable Pen Drive in Hindi or got to learn something, then please share this post on social networks like Facebook, Twitter etc.